HU
ENProduct details from catalogue Inquiry
Drawings:
7348-B-MP FAG
Angular contact ball bearing 73..-B-MP, single row, solid brass cage
| d | Bore diameter | 240,00 mm |
| D | Outside diameter | 500,00 mm |
| B | Width | 95,00 mm |
| Cr | Basic dynamic load rating, radial | 610.000,00 N |
| C0r | Basic static load rating, radial | 1.020.000,00 N |
| Cur | Fatigue load limit, radial | 27.500,00 N |
| nG | Limiting speed | 1.950,00 1/min |
| nϑr | Reference speed | 1.250,00 1/min |
| ≈m | Weight | 86,50 kg |
| da min | Minimum diameter of shaft shoulder | 260,00 mm |
| Da max | Maximum diameter of housing shoulder | 480,00 mm |
| Db max | Maximum diameter of housing shoulder | 489,00 mm |
| ra max | Maximum fillet radius of shaft | 4,00 mm |
| ra1 max | Maximum fillet radius of housing | 2,00 mm |
| rmin | Minimum chamfer dimension | 5,00 mm |
| r1 min | Minimum chamfer dimension | 2,00 mm |
| D1 | Shoulder diameter on outer ring wide side face | 400,90 mm |
| d1 | Shoulder diameter on inner ring wide side face | 345,20 mm |
| a | Distance between the apexes of the pressure cones | 203,00 mm |
| α | Contact angle | 40,00 ° |
| Tmin | Operating temperature min. | -30,00 °C |
| Tmax | Operating temperature max. | 200,00 °C |
| Design variant | Design variant B | B |
| Sealing | not sealed | Without |
| Cage | solid brass cage, ball guided | MP |
| Tolerance class | Normal (PN) | PN |
| Lubricant | Bearing not greased. | Without |
| Dimensional / heat stabilization | Rings dimensional stabilized up to 200° | S1 |