| d |
Bore diameter |
20 mm |
| D |
Outside diameter |
47 mm |
| B |
Width |
14 mm |
| Cr |
Basic dynamic load rating, radial |
14.900 N |
| C0r |
Basic static load rating, radial |
7.800 N |
| Cur |
Fatigue load limit, radial |
540 N |
| nG |
Limiting speed |
21.600 1/min |
| nϑr |
Reference speed |
15.400 1/min |
| ≈m |
Weight |
0,103 kg |
| da min |
Minimum diameter of shaft shoulder |
25,6 mm |
| Da max |
Maximum diameter of housing shoulder |
41,4 mm |
| Db max |
Maximum diameter of housing shoulder |
42,8 mm |
| ra max |
Maximum fillet radius of shaft |
1 mm |
| ra1 max |
Maximum fillet radius of housing |
0,6 mm |
| rmin |
Minimum chamfer dimension |
1 mm |
| r1 min |
Minimum chamfer dimension |
0,6 mm |
| D1 |
Shoulder diameter on outer ring wide side face |
37 mm |
| d1 |
Shoulder diameter on inner ring wide side face |
30,5 mm |
| a |
Distance between the apexes of the pressure cones |
21 mm |
| α |
Contact angle |
40 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
120 °C |
| Amin |
Axial clearance per set min. |
0 µm |
| Tol(+) |
Tolerance for axial clearance or preload per set |
6 µm |
| Design variant |
Design variant B |
B |
| Sealing |
not sealed |
Without |
| Cage |
solid cage made of glass-fiber reinforced polyamid PA66, ball guided |
TVP |
| Tolerance class |
Class5 (P5), better than P6 |
P5 |
| Bearing with matched conditions for fitting in pairs |
bearing set clearance-free in O or X arrangement |
UO |
| Lubricant |
Bearing not greased. |
Without |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 150° |
S0 |
HU
EN
