Product details from catalogue Inquiry

Drawings:

7309-B-XL-TVP-UB FAG


d Bore diameter 45 mm
D Outside diameter 100 mm
B Width 25 mm
Cr Basic dynamic load rating, radial 69.000 N
C0r Basic static load rating, radial 43.000 N
Cur Fatigue load limit, radial 3.000 N
nG Limiting speed 9.300 1/min
nϑr Reference speed 6.500 1/min
≈m Weight 0,829 kg
da min Minimum diameter of shaft shoulder 54 mm
Da max Maximum diameter of housing shoulder 91 mm
Db max Maximum diameter of housing shoulder 94,4 mm
ra max Maximum fillet radius of shaft 1,5 mm
ra1 max Maximum fillet radius of housing 1 mm
rmin Minimum chamfer dimension 1,5 mm
r1 min Minimum chamfer dimension 1 mm
D1 Shoulder diameter on outer ring wide side face 79,8 mm
d1 Shoulder diameter on inner ring wide side face 66,7 mm
a Distance between the apexes of the pressure cones 43 mm
α Contact angle 40 °
Tmin Operating temperature min. -30 °C
Tmax Operating temperature max. 120 °C
Amin Axial clearance per set min. 24 µm
Tol(+) Tolerance for axial clearance or preload per set 8 µm
Design variant Design variant B B
Sealing not sealed Without
Cage solid cage made of glass-fiber reinforced polyamid PA66, ball guided TVP
Tolerance class Class6 (P6), better than PN P6
Bearing with matched conditions for fitting in pairs bearing set with smaller axial internal clearance than UA UB
Lubricant Bearing not greased. Without
Dimensional / heat stabilization Rings dimensional stabilized up to 150° S0