| d |
Bore diameter |
75 mm |
| D |
Outside diameter |
130 mm |
| B |
Width |
25 mm |
| Cr |
Basic dynamic load rating, radial |
73.000 N |
| C0r |
Basic static load rating, radial |
62.000 N |
| Cur |
Fatigue load limit, radial |
4.250 N |
| nG |
Limiting speed |
6.900 1/min |
| nϑr |
Reference speed |
5.300 1/min |
| ≈m |
Weight |
1,16 kg |
| da min |
Minimum diameter of shaft shoulder |
84 mm |
| Da max |
Maximum diameter of housing shoulder |
121 mm |
| Db max |
Maximum diameter of housing shoulder |
124,4 mm |
| ra max |
Maximum fillet radius of shaft |
1,5 mm |
| ra1 max |
Maximum fillet radius of housing |
1 mm |
| rmin |
Minimum chamfer dimension |
1,5 mm |
| r1 min |
Minimum chamfer dimension |
1 mm |
| D1 |
Shoulder diameter on outer ring wide side face |
109,2 mm |
| d1 |
Shoulder diameter on inner ring wide side face |
96,5 mm |
| a |
Distance between the apexes of the pressure cones |
56 mm |
| α |
Contact angle |
40 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
120 °C |
| Amin |
Axial clearance per set min. |
28 µm |
| Tol(+) |
Tolerance for axial clearance or preload per set |
12 µm |
| Design variant |
Design variant B |
B |
| Sealing |
not sealed |
Without |
| Cage |
solid cage made of glass-fiber reinforced polyamid PA66, ball guided |
TVP |
| Tolerance class |
Normal (PN) |
PN |
| Bearing with matched conditions for fitting in pairs |
bearing set with smaller axial internal clearance than UA |
UB |
| Lubricant |
Bearing not greased. |
Without |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 150° |
S0 |
HU
EN
