| d |
Bore diameter |
100 mm |
| D |
Outside diameter |
125 mm |
| B |
Width |
19 mm |
| Cr |
Basic dynamic load rating, radial |
28.000 N |
| C0r |
Basic static load rating, radial |
39.000 N |
| Cur |
Fatigue load limit, radial |
2.120 N |
| nG |
Limiting speed |
2.470 1/min |
| ≈m |
Weight |
0,463 kg |
| da min |
Minimum diameter shaft shoulder |
104,6 mm |
| Da max |
Maximum diameter of housing shoulder |
120,4 mm |
| ra max |
Maximum fillet radius |
1 mm |
| rmin |
Minimum chamfer dimension |
1 mm |
| D2 |
Caliber diameter outer ring |
118,5 mm |
| d2 |
Caliber diamter inner ring |
107,3 mm |
| a |
Distance between the apexes of the pressure cones |
60,2 mm |
| α |
Contact angle |
25 ° |
| Tmin |
Operating temperature min. |
-20 °C |
| Tmax |
Operating temperature max. |
100 °C |
| Lubricant |
Standard ball bearing and insert bearing grease for D>62mm |
GA13 |
| Sealing |
Contact seal on both sides |
2RS |
| Cage |
solid cage made of glass-fiber reinforced polyamid PA66 |
TVH |
| Tolerance class |
Normal (PN) |
PN |
| Axial internal clearance |
Group N (CN) |
CN |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 120° |
SN |
| Design variant |
Design variant B |
B |
HU
EN
