| d |
Bore diameter |
15 mm |
| D |
Outside diameter |
32 mm |
| B |
Width |
13 mm |
| Cr |
Basic dynamic load rating, radial |
8.500 N |
| C0r |
Basic static load rating, radial |
5.400 N |
| Cur |
Fatigue load limit, radial |
290 N |
| nG |
Limiting speed |
17.900 1/min |
| nϑr |
Reference speed |
15.700 1/min |
| ≈m |
Weight |
0,042 kg |
| da min |
Minimum diameter shaft shoulder |
17 mm |
| Da max |
Maximum diameter of housing shoulder |
30 mm |
| ra max |
Maximum fillet radius |
0,3 mm |
| rmin |
Minimum chamfer dimension |
0,3 mm |
| D2 |
Caliber diameter outer ring |
27,9 mm |
| d2 |
Caliber diamter inner ring |
19,7 mm |
| a |
Distance between the apexes of the pressure cones |
18,4 mm |
| α |
Contact angle |
25 ° |
| Tmin |
Operating temperature min. |
-20 °C |
| Tmax |
Operating temperature max. |
120 °C |
| Lubricant |
ball bearing grease, low noise for D<=62mm |
GA14 |
| Sealing |
Non-contact seal on both sides |
2RZ |
| Cage |
solid cage made of glass-fiber reinforced polyamid PA66 |
TVH |
| Tolerance class |
Normal (PN) |
PN |
| Axial internal clearance |
Group 3 (C3), bigger than CN |
C3 |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 120° |
SN |
| Design variant |
Design variant B |
B |
HU
EN
