Product details from catalogue Inquiry

Drawings:

7202-B-XL-2RS-TVP-UO FAG


d Bore diameter 15 mm
D Outside diameter 35 mm
B Width 11 mm
Cr Basic dynamic load rating, radial 8.900 N
C0r Basic static load rating, radial 4.450 N
Cur Fatigue load limit, radial 305 N
nG Limiting speed 12.800 1/min
≈m Weight 0,046 kg
da min Minimum diameter of shaft shoulder 19,2 mm
Da max Maximum diameter of housing shoulder 30,8 mm
Db max Maximum diameter of housing shoulder 32,6 mm
ra max Maximum fillet radius of shaft 0,6 mm
ra1 max Maximum fillet radius of housing 0,3 mm
rmin Minimum chamfer dimension 0,6 mm
r1 min Minimum chamfer dimension 0,3 mm
D1 Shoulder diameter on outer ring wide side face 27,6 mm
D2 Caliber diameter on outer ring wide side face 29,2 mm
D3 Caliber diameter on outer ring small side face 32,1 mm
d1 Shoulder diameter on inner ring wide side face 22,8 mm
d2 Caliber diameter on inner ring wide side face 19,7 mm
a Distance between the apexes of the pressure cones 16 mm
α Contact angle 40 °
Tmin Operating temperature min. -20 °C
Tmax Operating temperature max. 100 °C
Amin Axial clearance per set min. 0 µm
Tol(+) Tolerance for axial clearance or preload per set 8 µm
Design variant Design variant B B
Sealing Contact seal on both sides 2RS
Cage solid cage made of glass-fiber reinforced polyamid PA66, ball guided TVP
Tolerance class Class6 (P6), better than PN P6
Bearing with matched conditions for fitting in pairs bearing set clearance-free in O or X arrangement UO
Lubricant ball bearing grease, low noise for D<=62mm GA14
Dimensional / heat stabilization Rings dimensional stabilized up to 150° S0