| d |
Bore diameter |
25 mm |
| D |
Outside diameter |
52 mm |
| B |
Width |
20,6 mm |
| Cr |
Basic dynamic load rating, radial |
22.000 N |
| C0r |
Basic static load rating, radial |
15.200 N |
| Cur |
Fatigue load limit, radial |
1.050 N |
| nG |
Limiting speed |
10.700 1/min |
| ≈m |
Weight |
0,175 kg |
| da min |
Minimum diameter shaft shoulder |
30,6 mm |
| Da max |
Maximum diameter of housing shoulder |
46,4 mm |
| ra max |
Maximum fillet radius |
1 mm |
| rmin |
Minimum chamfer dimension |
1 mm |
| D2 |
Caliber diameter outer ring |
47,6 mm |
| d2 |
Caliber diamter inner ring |
34,2 mm |
| a |
Distance between the apexes of the pressure cones |
30,8 mm |
| α |
Contact angle |
30 ° |
| Tmin |
Operating temperature min. |
-20 °C |
| Tmax |
Operating temperature max. |
100 °C |
| Lubricant |
Grease (L114/customer specific) |
L114 |
| Sealing |
Contact seal on both sides |
2HRS |
| Cage |
solid cage made of glass-fiber reinforced polyamid PA66 |
TVH |
| Tolerance class |
Class6 (P6), better than PN |
P6 |
| Axial internal clearance |
Group 3 (C3), bigger than CN |
C3 |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 120° |
SN |
| Design variant |
Design variant BD |
BD |
HU
EN
