HU
EN7006-B-XL-2RS-FKM-TVP-L454 FAG
Net price:
0 €/db
Product details from catalogue
Drawings:
7006-B-XL-2RS-FKM-TVP-L454 FAG
| d | Bore diameter | 30 mm |
| D | Outside diameter | 55 mm |
| B | Width | 13 mm |
| Cr | Basic dynamic load rating, radial | 19.900 N |
| C0r | Basic static load rating, radial | 13.400 N |
| Cur | Fatigue load limit, radial | 930 N |
| nG | Limiting speed | 6.900 1/min |
| ≈m | Weight | 0,115 kg |
| da min | Minimum diameter of shaft shoulder | 34,6 mm |
| Da max | Maximum diameter of housing shoulder | 50,4 mm |
| Db max | Maximum diameter of housing shoulder | 51,8 mm |
| ra max | Maximum fillet radius of shaft | 1 mm |
| ra1 max | Maximum fillet radius of housing | 0,6 mm |
| rmin | Minimum chamfer dimension | 1 mm |
| r1 min | Minimum chamfer dimension | 0,6 mm |
| D1 | Shoulder diameter on outer ring wide side face | 47,1 mm |
| D2 | Caliber diameter on outer ring wide side face | 47,7 mm |
| D3 | Caliber diameter on outer ring small side face | 51,9 mm |
| d1 | Shoulder diameter on inner ring wide side face | 41,3 mm |
| d2 | Caliber diameter on inner ring wide side face | 38 mm |
| a | Distance between the apexes of the pressure cones | 24 mm |
| α | Contact angle | 40 ° |
| Tmin | Operating temperature min. | -20 °C |
| Tmax | Operating temperature max. | 120 °C |
| Design variant | Design variant B | B |
| Sealing | Contact seal on both sides | 2RS |
| Cage | solid cage made of glass-fiber reinforced polyamid PA66, ball guided | TVP |
| Tolerance class | Normal (PN) | PN |
| Lubricant | Grease (L454/customer specific) | L454 |
| Dimensional / heat stabilization | Rings dimensional stabilized up to 150° | S0 |