Product details from catalogue Inquiry

Drawings:

7006-B-XL-2RS-TVP-UL FAG


d Bore diameter 30 mm
D Outside diameter 55 mm
B Width 13 mm
Cr Basic dynamic load rating, radial 19.900 N
C0r Basic static load rating, radial 13.400 N
Cur Fatigue load limit, radial 930 N
nG Limiting speed 6.900 1/min
≈m Weight 0,112 kg
da min Minimum diameter of shaft shoulder 34,6 mm
Da max Maximum diameter of housing shoulder 50,4 mm
Db max Maximum diameter of housing shoulder 51,8 mm
ra max Maximum fillet radius of shaft 1 mm
ra1 max Maximum fillet radius of housing 0,6 mm
rmin Minimum chamfer dimension 1 mm
r1 min Minimum chamfer dimension 0,6 mm
D1 Shoulder diameter on outer ring wide side face 47,1 mm
D2 Caliber diameter on outer ring wide side face 47,7 mm
D3 Caliber diameter on outer ring small side face 51,9 mm
d1 Shoulder diameter on inner ring wide side face 41,3 mm
d2 Caliber diameter on inner ring wide side face 38 mm
a Distance between the apexes of the pressure cones 24 mm
α Contact angle 40 °
Tmin Operating temperature min. -20 °C
Tmax Operating temperature max. 100 °C
Vmax Preload per set max. -4 µm
Tol(+) Tolerance for axial clearance or preload per set 8 µm
FV max Preload force 141 N
Design variant Design variant B B
Sealing Contact seal on both sides 2RS
Cage solid cage made of glass-fiber reinforced polyamid PA66, ball guided TVP
Tolerance class Normal (PN) PN
Bearing with matched conditions for fitting in pairs bearing set with light preload UL
Lubricant ball bearing grease, low noise for D<=62mm GA14
Dimensional / heat stabilization Rings dimensional stabilized up to 150° S0