| d |
Bore diameter |
30 mm |
| D |
Outside diameter |
72 mm |
| B |
Width |
19 mm |
| Cr |
Basic dynamic load rating, radial |
37.500 N |
| C0r |
Basic static load rating, radial |
22.100 N |
| Cur |
Fatigue load limit, radial |
1.530 N |
| nG |
Limiting speed |
6.000 1/min |
| ≈m |
Weight |
0,35 kg |
| da min |
Minimum diameter of shaft shoulder |
37 mm |
| Da max |
Maximum diameter of housing shoulder |
65 mm |
| Db max |
Maximum diameter of housing shoulder |
67,8 mm |
| ra max |
Maximum fillet radius of shaft |
1 mm |
| ra1 max |
Maximum fillet radius of housing |
0,6 mm |
| rmin |
Minimum chamfer dimension |
1,1 mm |
| r1 min |
Minimum chamfer dimension |
0,6 mm |
| D1 |
Shoulder diameter on outer ring wide side face |
55,9 mm |
| D2 |
Caliber diameter on outer ring wide side face |
58,5 mm |
| D3 |
Caliber diameter on outer ring small side face |
65,9 mm |
| d1 |
Shoulder diameter on inner ring wide side face |
47,1 mm |
| d2 |
Caliber diameter on inner ring wide side face |
42,7 mm |
| a |
Distance between the apexes of the pressure cones |
31 mm |
| α |
Contact angle |
40 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
100 °C |
| Design variant |
Design variant B |
B |
| Sealing |
Contact seal on both sides |
2RS |
| Cage |
solid cage made of glass-fiber reinforced polyamid PA66, ball guided |
TVP |
| Tolerance class |
Class6 (P6), better than PN |
P6 |
| Lubricant |
Grease (L237/customer specific) |
L237 |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 150° |
S0 |
HU
EN
