| d |
Bore diameter |
35 mm |
| D |
Outside diameter |
80 mm |
| B |
Width |
34,9 mm |
| Cr |
Basic dynamic load rating, radial |
55.000 N |
| C0r |
Basic static load rating, radial |
36.500 N |
| Cur |
Fatigue load limit, radial |
2.550 N |
| nG |
Limiting speed |
6.800 1/min |
| ≈m |
Weight |
0,72 kg |
| da min |
Minimum diameter shaft shoulder |
44 mm |
| Da max |
Maximum diameter of housing shoulder |
71 mm |
| ra max |
Maximum fillet radius |
1,5 mm |
| rmin |
Minimum chamfer dimension |
1,5 mm |
| D2 |
Caliber diameter outer ring |
71,9 mm |
| d2 |
Caliber diamter inner ring |
49,6 mm |
| a |
Distance between the apexes of the pressure cones |
48 mm |
| α |
Contact angle |
30 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
100 °C |
| Lubricant |
Grease (L100/customer specific) |
L100 |
| Sealing |
Contact seal on both sides |
2HRS |
| Cage |
solid cage made of glass-fiber reinforced polyamid PA66 |
TVH |
| Tolerance class |
Class6 (P6), better than PN |
P6 |
| Axial internal clearance |
Group N (CN) |
CN |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 120° |
SN |
| Design variant |
Design variant BD |
BD |
HU
EN
