HU
EN7007 B-2RS-TVP-P5-UO FAG
Net price:
0 €/db
Product details from catalogue
Drawings:
7007-B-XL-2RS-TVP-P5-UO FAG
| d | Bore diameter | 35 mm |
| D | Outside diameter | 62 mm |
| B | Width | 14 mm |
| Cr | Basic dynamic load rating, radial | 24.300 N |
| C0r | Basic static load rating, radial | 17.200 N |
| Cur | Fatigue load limit, radial | 1.200 N |
| nG | Limiting speed | 6.000 1/min |
| ≈m | Weight | 0,14 kg |
| da min | Minimum diameter of shaft shoulder | 39,6 mm |
| Da max | Maximum diameter of housing shoulder | 57,4 mm |
| Db max | Maximum diameter of housing shoulder | 58,8 mm |
| ra max | Maximum fillet radius of shaft | 1 mm |
| ra1 max | Maximum fillet radius of housing | 0,6 mm |
| rmin | Minimum chamfer dimension | 1 mm |
| r1 min | Minimum chamfer dimension | 0,6 mm |
| D1 | Shoulder diameter on outer ring wide side face | 53,4 mm |
| D2 | Caliber diameter on outer ring wide side face | 54 mm |
| D3 | Caliber diameter on outer ring small side face | 58,9 mm |
| d1 | Shoulder diameter on inner ring wide side face | 47 mm |
| d2 | Caliber diameter on inner ring wide side face | 43,6 mm |
| a | Distance between the apexes of the pressure cones | 27 mm |
| α | Contact angle | 40 ° |
| Tmin | Operating temperature min. | -20 °C |
| Tmax | Operating temperature max. | 100 °C |
| Amin | Axial clearance per set min. | 0 µm |
| Tol(+) | Tolerance for axial clearance or preload per set | 6 µm |
| Design variant | Design variant B | B |
| Sealing | Contact seal on both sides | 2RS |
| Cage | solid cage made of glass-fiber reinforced polyamid PA66, ball guided | TVP |
| Tolerance class | Class5 (P5), better than P6 | P5 |
| Bearing with matched conditions for fitting in pairs | bearing set clearance-free in O or X arrangement | UO |
| Lubricant | ball bearing grease, low noise for D<=62mm | GA14 |
| Dimensional / heat stabilization | Rings dimensional stabilized up to 150° | S0 |