| d |
Bore diameter |
40 mm |
| D |
Outside diameter |
90 mm |
| B |
Width |
23 mm |
| Cr |
Basic dynamic load rating, radial |
57.000 N |
| C0r |
Basic static load rating, radial |
34.500 N |
| Cur |
Fatigue load limit, radial |
2.390 N |
| nG |
Limiting speed |
13.500 1/min |
| nϑr |
Reference speed |
7.100 1/min |
| ≈m |
Weight |
0,68 kg |
| da min |
Minimum diameter of shaft shoulder |
49 mm |
| Da max |
Maximum diameter of housing shoulder |
81 mm |
| Db max |
Maximum diameter of housing shoulder |
84,4 mm |
| ra max |
Maximum fillet radius of shaft |
1,5 mm |
| ra1 max |
Maximum fillet radius of housing |
1 mm |
| rmin |
Minimum chamfer dimension |
1,5 mm |
| r1 min |
Minimum chamfer dimension |
1 mm |
| D1 |
Shoulder diameter on outer ring wide side face |
71,3 mm |
| d1 |
Shoulder diameter on inner ring wide side face |
59,99 mm |
| a |
Distance between the apexes of the pressure cones |
39 mm |
| α |
Contact angle |
40 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
150 °C |
| Amin |
Axial clearance per set min. |
22 µm |
| Tol(+) |
Tolerance for axial clearance or preload per set |
8 µm |
| Design variant |
Design variant B |
B |
| Sealing |
not sealed |
Without |
| Cage |
solid brass cage, ball guided |
MP |
| Tolerance class |
Class6 (P6), better than PN |
P6 |
| Bearing with matched conditions for fitting in pairs |
bearing set with smaller axial internal clearance than UA |
UB |
| Lubricant |
Bearing not greased. |
Without |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 150° |
S0 |
HU
EN
