| d |
Bore diameter |
60 mm |
| D |
Outside diameter |
110 mm |
| B |
Width |
36,5 mm |
| Cr |
Basic dynamic load rating, radial |
75.000 N |
| C0r |
Basic static load rating, radial |
64.000 N |
| Cur |
Fatigue load limit, radial |
4.400 N |
| nG |
Limiting speed |
4.750 1/min |
| ≈m |
Weight |
1,31 kg |
| da min |
Minimum diameter shaft shoulder |
69 mm |
| Da max |
Maximum diameter of housing shoulder |
101 mm |
| ra max |
Maximum fillet radius |
1,5 mm |
| rmin |
Minimum chamfer dimension |
1,5 mm |
| D2 |
Caliber diameter outer ring |
100,5 mm |
| d2 |
Caliber diamter inner ring |
76,6 mm |
| a |
Distance between the apexes of the pressure cones |
64,7 mm |
| α |
Contact angle |
30 ° |
| Tmin |
Operating temperature min. |
-20 °C |
| Tmax |
Operating temperature max. |
100 °C |
| Lubricant |
Standard ball bearing and insert bearing grease for D>62mm |
GA13 |
| Sealing |
Contact seal on both sides |
2HRS |
| Cage |
steel sheet metal |
J |
| Tolerance class |
Class6 (P6), better than PN |
P6 |
| Axial internal clearance |
Group 3 (C3), bigger than CN |
C3 |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 150° |
S0 |
| Design variant |
Design variant BD |
BD |
HU
EN
