| d |
Bore diameter |
65 mm |
| D |
Outside diameter |
120 mm |
| B |
Width |
38,1 mm |
| Cr |
Basic dynamic load rating, radial |
86.000 N |
| C0r |
Basic static load rating, radial |
77.000 N |
| Cur |
Fatigue load limit, radial |
5.300 N |
| nG |
Limiting speed |
4.300 1/min |
| nϑr |
Reference speed |
6.000 1/min |
| ≈m |
Weight |
1,63 kg |
| da min |
Minimum diameter shaft shoulder |
74 mm |
| Da max |
Maximum diameter of housing shoulder |
111 mm |
| ra max |
Maximum fillet radius |
1,5 mm |
| rmin |
Minimum chamfer dimension |
1,5 mm |
| D2 |
Caliber diameter outer ring |
110,1 mm |
| d2 |
Caliber diamter inner ring |
85,3 mm |
| a |
Distance between the apexes of the pressure cones |
70,6 mm |
| α |
Contact angle |
30 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
120 °C |
| Lubricant |
Grease (L404/customer specific) |
L404 |
| Sealing |
Non-contact Shield on both sides |
2Z |
| Cage |
solid cage made of glass-fiber reinforced polyamid PA66 |
TVH |
| Tolerance class |
Class6 (P6), better than PN |
P6 |
| Axial internal clearance |
Group N (CN) |
CN |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 150° |
S0 |
| Design variant |
Design variant BD |
BD |
HU
EN
