| d |
Bore diameter |
65 mm |
| D |
Outside diameter |
140 mm |
| B |
Width |
58,7 mm |
| Cr |
Basic dynamic load rating, radial |
150.000 N |
| C0r |
Basic static load rating, radial |
119.000 N |
| Cur |
Fatigue load limit, radial |
8.100 N |
| nG |
Limiting speed |
3.650 1/min |
| nϑr |
Reference speed |
5.300 1/min |
| ≈m |
Weight |
3,5 kg |
| da min |
Minimum diameter shaft shoulder |
77 mm |
| Da max |
Maximum diameter of housing shoulder |
128 mm |
| ra max |
Maximum fillet radius |
2,1 mm |
| rmin |
Minimum chamfer dimension |
2,1 mm |
| D2 |
Caliber diameter outer ring |
125 mm |
| d2 |
Caliber diamter inner ring |
90,6 mm |
| a |
Distance between the apexes of the pressure cones |
83,5 mm |
| α |
Contact angle |
30 ° |
| Tmin |
Operating temperature min. |
-20 °C |
| Tmax |
Operating temperature max. |
120 °C |
| Lubricant |
Grease (L140/customer specific) |
L140 |
| Sealing |
Non-contact Shield on both sides |
2Z |
| Cage |
solid cage made of glass-fiber reinforced polyamid PA66 |
TVH |
| Tolerance class |
Class6 (P6), better than PN |
P6 |
| Axial internal clearance |
Group 3 (C3), bigger than CN |
C3 |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 150° |
S0 |
| Design variant |
Design variant BD |
BD |
HU
EN
