| d |
Bore diameter |
110 mm |
| D |
Outside diameter |
240 mm |
| B |
Width |
50 mm |
| Cr |
Basic dynamic load rating, radial |
250.000 N |
| C0r |
Basic static load rating, radial |
245.000 N |
| Cur |
Fatigue load limit, radial |
12.800 N |
| nG |
Limiting speed |
3.650 1/min |
| nϑr |
Reference speed |
3.150 1/min |
| ≈m |
Weight |
9,91 kg |
| da min |
Minimum diameter of shaft shoulder |
124 mm |
| Da max |
Maximum diameter of housing shoulder |
226 mm |
| Db max |
Maximum diameter of housing shoulder |
233 mm |
| ra max |
Maximum fillet radius of shaft |
2,5 mm |
| ra1 max |
Maximum fillet radius of housing |
1 mm |
| rmin |
Minimum chamfer dimension |
3 mm |
| r1 min |
Minimum chamfer dimension |
1,1 mm |
| D1 |
Shoulder diameter on outer ring wide side face |
190,9 mm |
| d1 |
Shoulder diameter on inner ring wide side face |
162,3 mm |
| a |
Distance between the apexes of the pressure cones |
98 mm |
| α |
Contact angle |
40 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
120 °C |
| Vmax |
Preload per set max. |
-16 µm |
| Tol(+) |
Tolerance for axial clearance or preload per set |
10 µm |
| FV max |
Preload force |
1.723 N |
| Design variant |
Design variant B |
B |
| Sealing |
not sealed |
Without |
| Cage |
solid cage made of glass-fiber reinforced polyamid PA66, ball guided |
TVP |
| Tolerance class |
Class5 (P5), better than P6 |
P5 |
| Bearing with matched conditions for fitting in pairs |
bearing set with light preload |
UL |
| Lubricant |
Bearing not greased. |
Without |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 150° |
S0 |
HU
EN
