| d |
Bore diameter |
220 mm |
| D |
Outside diameter |
460 mm |
| B |
Width |
88 mm |
| Cr |
Basic dynamic load rating, radial |
540.000 N |
| C0r |
Basic static load rating, radial |
850.000 N |
| Cur |
Fatigue load limit, radial |
24.100 N |
| nG |
Limiting speed |
2.140 1/min |
| nϑr |
Reference speed |
1.400 1/min |
| ≈m |
Weight |
71,3 kg |
| da min |
Minimum diameter of shaft shoulder |
240 mm |
| Da max |
Maximum diameter of housing shoulder |
440 mm |
| Db max |
Maximum diameter of housing shoulder |
449 mm |
| ra max |
Maximum fillet radius of shaft |
4 mm |
| ra1 max |
Maximum fillet radius of housing |
2 mm |
| rmin |
Minimum chamfer dimension |
5 mm |
| r1 min |
Minimum chamfer dimension |
2 mm |
| D1 |
Shoulder diameter on outer ring wide side face |
365,7 mm |
| d1 |
Shoulder diameter on inner ring wide side face |
315 mm |
| a |
Distance between the apexes of the pressure cones |
187 mm |
| α |
Contact angle |
40 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
200 °C |
| Amin |
Axial clearance per set min. |
100 µm |
| Tol(+) |
Tolerance for axial clearance or preload per set |
16 µm |
| Design variant |
Design variant B |
B |
| Sealing |
not sealed |
Without |
| Cage |
solid brass cage, ball guided |
MP |
| Tolerance class |
Normal (PN) |
PN |
| Bearing with matched conditions for fitting in pairs |
bearing set with small axial internal clearance |
UA |
| Lubricant |
Bearing not greased. |
Without |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 200° |
S1 |
HU
EN
