| d |
Bore diameter |
300 mm |
| D |
Outside diameter |
380 mm |
| B |
Width |
38 mm |
| Cr |
Basic dynamic load rating, radial |
204.000 N |
| C0r |
Basic static load rating, radial |
315.000 N |
| Cur |
Fatigue load limit, radial |
9.900 N |
| nG |
Limiting speed |
2.450 1/min |
| nϑr |
Reference speed |
1.450 1/min |
| ≈m |
Weight |
9,87 kg |
| da min |
Minimum diameter of shaft shoulder |
310,2 mm |
| Da max |
Maximum diameter of housing shoulder |
369,8 mm |
| Db max |
Maximum diameter of housing shoulder |
374 mm |
| ra max |
Maximum fillet radius of shaft |
2,1 mm |
| ra1 max |
Maximum fillet radius of housing |
1 mm |
| rmin |
Minimum chamfer dimension |
2,1 mm |
| r1 min |
Minimum chamfer dimension |
1,1 mm |
| D1 |
Shoulder diameter on outer ring wide side face |
348 mm |
| d1 |
Shoulder diameter on inner ring wide side face |
331 mm |
| a |
Distance between the apexes of the pressure cones |
117 mm |
| α |
Contact angle |
30 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
200 °C |
| Vmax |
Preload per set max. |
-12 µm |
| Tol(+) |
Tolerance for axial clearance or preload per set |
14 µm |
| FV max |
Preload force |
1.569 N |
| Design variant |
|
Standard |
| Sealing |
not sealed |
Without |
| Cage |
solid brass cage, outer ring guided |
MPA |
| Tolerance class |
Class5 (P5), better than P6 |
P5 |
| Bearing with matched conditions for fitting in pairs |
bearing set with light preload |
UL |
| Lubricant |
Bearing not greased. |
Without |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 200° |
S1 |
HU
EN
