HU
ENProduct details from catalogue Inquiry
Drawings:
6301-2Z-L069-C3 FAG
Deep groove ball bearing 63..-2Z, single row, shields, steel sheet metal cage
| d | Bore diameter | 12 mm |
| D | Outside diameter | 37 mm |
| B | Width | 12 mm |
| Cr | Basic dynamic load rating, radial | 10.300 N |
| C0r | Basic static load rating, radial | 4.200 N |
| Cur | Fatigue load limit, radial | 290 N |
| nG | Limiting speed | 24.000 1/min |
| nϑr | Reference speed | 20.000 1/min |
| ≈m | Weight | 59,8 g |
| da min | Minimum diameter shaft shoulder | 17,6 mm |
| Da max | Maximum diameter of housing shoulder | 31,4 mm |
| ra max | Maximum fillet radius | 1 mm |
| rmin | Minimum chamfer dimension | 1 mm |
| D2 | Caliber diameter outer ring | 31,4 mm |
| d1 | Shoulder diameter inner ring | 19,5 mm |
| Tmin | Operating temperature min. | -30 °C |
| Tmax | Operating temperature max. | 120 °C |
| f0 | Calculation factor | 11,1 |
| Sealing | Non-contact Shield on both sides | 2Z |
| Cage | steel sheet metal | JN |
| Tolerance class | Normal (PN) | PN |
| Dimensional / heat stabilization | Rings dimensional stabilized up to 120° | SN |
| Lubricant | Grease (L069/customer specific) | L069 |
| Fill factor | Standard | |
| Radial internal clearance | Group 3 (C3), bigger than CN | C3 |
| Bore type | Cylindrical | Z |