HU
ENProduct details from catalogue Inquiry
Drawings:
S6205-2Z-HLC FAG
Deep groove ball bearing S62..-2Z, corrosion-resistant materials, single row, shields, steel sheet metal cage
| d | Bore diameter | 25 mm |
| D | Outside diameter | 52 mm |
| B | Width | 15 mm |
| Cr | Basic dynamic load rating, radial | 11.900 N |
| C0r | Basic static load rating, radial | 6.300 N |
| Cur | Fatigue load limit, radial | 405 N |
| nG | Limiting speed | 16.500 1/min |
| nϑr | Reference speed | 14.100 1/min |
| ≈m | Weight | 0,129 kg |
| da min | Minimum diameter shaft shoulder | 30,6 mm |
| Da max | Maximum diameter of housing shoulder | 46,4 mm |
| ra max | Maximum fillet radius | 1 mm |
| rmin | Minimum chamfer dimension | 1 mm |
| D2 | Caliber diameter outer ring | 45,72 mm |
| d1 | Shoulder diameter inner ring | 34 mm |
| Tmin | Operating temperature min. | -30 °C |
| Tmax | Operating temperature max. | 120 °C |
| f0 | Calculation factor | 11,1 |
| Material Bearing | Stainless steel | S |
| Sealing | Non-contact Shield on both sides | 2Z |
| Cage | steel sheet metal | JN |
| Tolerance class | Normal (PN) | PN |
| Dimensional / heat stabilization | Rings dimensional stabilized up to 120° | SN |
| Lubricant | ball bearing grease, low noise for D<=62mm | GA14 |
| Fill factor | Standard | |
| Radial internal clearance | Group N (CN) | CN |
| Bore type | Cylindrical | Z |