HU
ENProduct details from catalogue Inquiry
Drawings:
QJ10/630-N2-MPA FAG
Four point contact bearing QJ10..-N2-MPA, holding grooves, solid brass cage
| d | Bore diameter | 630,00 mm |
| D | Outside diameter | 920,00 mm |
| B | Width | 128,00 mm |
| Cr | Basic dynamic load rating, radial | 1.640.000,00 N |
| C0r | Basic static load rating, radial | 5.100.000,00 N |
| Cur | Fatigue load limit, radial | 101.000,00 N |
| nG | Limiting speed | 1.110,00 1/min |
| nϑr | Reference speed | 405,00 1/min |
| ≈m | Weight | 340,00 kg |
| da min | Minimum diameter shaft shoulder | 658,00 mm |
| Da max | Maximum diameter of housing shoulder | 892,00 mm |
| ra max | Maximum fillet radius | 6,00 mm |
| rmin | Minimum chamfer dimension | 7,50 mm |
| D1 | Shoulder diameter outer ring | 822,50 mm |
| d1 | Shoulder diameter inner ring | 731,80 mm |
| a | Distance between the apexes of the pressure cones | 543,00 mm |
| an | Hight retaining slot | 32,00 mm |
| bn | Width retaining slot | 20,50 mm |
| rn | Radius retaining slot | 3,00 mm |
| α | Contact angle | 35,00 ° |
| Tmin | Operating temperature min. | -30,00 °C |
| Tmax | Operating temperature max. | 200,00 °C |
| Cage | solid brass cage, outer ring guided | MPA |
| Design, bearing outer ring | two retaining grooves in the outer ring on one side | N2 |
| Coating | Without | |
| Tolerance class | Normal (PN) | PN |
| Dimensional / heat stabilization | Rings dimensional stabilized up to 200° | S1 |
| Axial internal clearance | Group N (CN) | CN |