| d |
Bore diameter |
75 mm |
| D |
Outside diameter |
130 mm |
| B |
Width |
25 mm |
| Cr |
Basic dynamic load rating, radial |
123.000 N |
| C0r |
Basic static load rating, radial |
122.000 N |
| Cur |
Fatigue load limit, radial |
8.800 N |
| nG |
Limiting speed |
10.200 1/min |
| nϑr |
Reference speed |
4.550 1/min |
| ≈m |
Weight |
1,425 kg |
| da min |
Minimum diameter shaft shoulder |
84 mm |
| Da max |
Maximum diameter of housing shoulder |
121 mm |
| ra max |
Maximum fillet radius |
1,5 mm |
| rmin |
Minimum chamfer dimension |
1,5 mm |
| D1 |
Shoulder diameter outer ring |
111,5 mm |
| d1 |
Shoulder diameter inner ring |
93,9 mm |
| a |
Distance between the apexes of the pressure cones |
72 mm |
| an |
Hight retaining slot |
6,5 mm |
| bn |
Width retaining slot |
6,5 mm |
| rn |
Radius retaining slot |
0,5 mm |
| α |
Contact angle |
35 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
150 °C |
| Cage |
solid brass cage, outer ring guided |
MPA |
| Design, bearing outer ring |
two retaining grooves in the outer ring on one side |
N2 |
| Tolerance class |
Normal (PN) |
PN |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 150° |
S0 |
| Axial internal clearance |
Group 4 (C4), bigger than C3 |
C4 |
HU
EN
