| d |
Bore diameter |
200 mm |
| D |
Outside diameter |
360 mm |
| B |
Width |
70 mm |
| Cr |
Basic dynamic load rating, radial |
520.000 N |
| C0r |
Basic static load rating, radial |
860.000 N |
| Cur |
Fatigue load limit, radial |
29.000 N |
| nG |
Limiting speed |
3.200 1/min |
| nϑr |
Reference speed |
1.770 1/min |
| ≈m |
Weight |
32 kg |
| da min |
Minimum diameter shaft shoulder |
217 mm |
| Da max |
Maximum diameter of housing shoulder |
343 mm |
| ra max |
Maximum fillet radius |
3 mm |
| rmin |
Minimum chamfer dimension |
4 mm |
| D1 |
Shoulder diameter outer ring |
303,5 mm |
| d1 |
Shoulder diameter inner ring |
259,1 mm |
| a |
Distance between the apexes of the pressure cones |
560 mm |
| an |
Hight retaining slot |
12,7 mm |
| bn |
Width retaining slot |
10,5 mm |
| rn |
Radius retaining slot |
2 mm |
| α |
Contact angle |
45 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
200 °C |
| Cage |
solid brass cage, outer ring guided |
MPA |
| Design, bearing outer ring |
two retaining grooves in the outer ring on one side |
N2 |
| Coating |
Bearing or components burnished |
J30## |
| Tolerance class |
Normal (PN) |
PN |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 200° |
S1 |
| Axial internal clearance |
Group 3 (C3), bigger than CN |
C3 |
HU
EN
