| d |
Bore diameter |
220 mm |
| D |
Outside diameter |
460 mm |
| B |
Width |
88 mm |
| Cr |
Basic dynamic load rating, radial |
900.000 N |
| C0r |
Basic static load rating, radial |
1.650.000 N |
| Cur |
Fatigue load limit, radial |
51.000 N |
| nG |
Limiting speed |
2.430 1/min |
| nϑr |
Reference speed |
1.080 1/min |
| ≈m |
Weight |
77,1 kg |
| da min |
Minimum diameter shaft shoulder |
240 mm |
| Da max |
Maximum diameter of housing shoulder |
440 mm |
| ra max |
Maximum fillet radius |
4 mm |
| rmin |
Minimum chamfer dimension |
5 mm |
| D1 |
Shoulder diameter outer ring |
378 mm |
| d1 |
Shoulder diameter inner ring |
302 mm |
| a |
Distance between the apexes of the pressure cones |
238 mm |
| an |
Hight retaining slot |
15 mm |
| bn |
Width retaining slot |
12,5 mm |
| rn |
Radius retaining slot |
2,5 mm |
| α |
Contact angle |
35 ° |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
200 °C |
| Cage |
solid brass cage, outer ring guided |
MPA |
| Design, bearing outer ring |
two retaining grooves in the outer ring on one side |
N2 |
| Coating |
|
Without |
| Tolerance class |
Normal (PN) |
PN |
| Dimensional / heat stabilization |
Rings dimensional stabilized up to 200° |
S1 |
| Axial internal clearance |
Group 3 (C3), bigger than CN |
C3 |
HU
EN
