HU
ENProduct details from catalogue Inquiry
Drawings:
GIHRK120-DO INA
Hydraulic rod end, with thread clamping device, right hand thread, requiring maintenance, sliding contact surface: steel/steel, open design
| d | Bore diameter bearing | 120 mm |
| D | Outside diameter bearing | 180 mm |
| B | Width inner ring, | 85 mm |
| Cr | Basic dynamic load rating, radial | 952.000 N |
| C0r | Basic static load rating, radial | 2.370.000 N |
| ≈m | Weight | 75,9 kg |
| dK | Ball diameter | 160 mm |
| d1 | Outer flange diameter inner ring | 135,6 mm |
| d2 | Outer eye diameter | 340 mm |
| d3 | Thread size | M130x3 |
| d4 | Shank diameter | 172 mm |
| h1 | Shank Length Internal thread head | 310 mm |
| C1 | Width of the rod end | 90 mm |
| α | Tilt angle | 6 ° |
| l3 | Thread length Internal thread | 135 mm |
| l4 | Total length internal thread head | 490 mm |
| l7 | Distance drilling with/shaft start | 140 mm |
| d 7 | Welding Shank Diameter | M24x80 mm |
| d5 | Shank diameter, large | 217 mm |
| r1smin | Edge Spacing | 1 mm |
| Gr | Radial Clearance | 0,065 - 0,165 mm |
| MA | Tightening torque | 660 Nm |
| dOT | Bore diameter bearing, upper tolerance | 0 mm |
| dUT | Bore diameter bearing, lower tolerance | -0,02 mm |
| BOT | Width inner ring, upper tolerance | 0 mm |
| BUT | Width inner ring, lower tolerance | -0,2 mm |
| Tmin | Operating temperature min. | -60 °C |
| Tmax | Operating temperature max. | 200 °C |
| Sealing | Without |