HU
ENProduct details from catalogue Inquiry
Drawings:
GIHNRK125-LO INA
Hydraulic rod end, with thread clamping device, right hand thread, requiring maintenance, sliding contact surface: steel/steel, DIN 24338 ISO 6982, open design
| d | Bore diameter bearing | 125 mm |
| D | Outside diameter bearing | 180 mm |
| B | Width inner ring, | 125 mm |
| Cr | Basic dynamic load rating, radial | 952.000 N |
| C0r | Basic static load rating, radial | 1.390.000 N |
| ≈m | Weight | 44 kg |
| dK | Ball diameter | 160 mm |
| d1 | Outer flange diameter inner ring | 138 mm |
| d2 | Outer eye diameter | 262 mm |
| d3 | Thread size | M100x3 |
| d4 | Shank diameter | 135 mm |
| h1 | Shank Length Internal thread head | 260 mm |
| C1 | Width of the rod end | 102 mm |
| α | Tilt angle | 4 ° |
| l3 | Thread length Internal thread | 113 mm |
| l4 | Total length internal thread head | 405 mm |
| l7 | Distance drilling with/shaft start | 120 mm |
| d 7 | Welding Shank Diameter | M20x70 mm |
| d5 | Shank diameter, large | 200 mm |
| C2 | Width | 72 mm |
| r1smin | Edge Spacing | 1 mm |
| Gr | Radial Clearance | 0,065 - 0,165 mm |
| FZ | Cylinder Force | 800.000 N |
| MA | Tightening torque | 385 Nm |
| dOT | Bore diameter bearing, upper tolerance | 0,04 mm |
| dT | Bore diameter bearing, tolerance | H7 mm |
| dUT | Bore diameter bearing, lower tolerance | 0 mm |
| BOT | Width inner ring, upper tolerance | 0 mm |
| BUT | Width inner ring, lower tolerance | -0,4 mm |
| Tmin | Operating temperature min. | -60 °C |
| Tmax | Operating temperature max. | 200 °C |
| Sealing | Without |