| d |
Bore diameter |
342,9 mm |
| D |
Outside diameter |
450,85 mm |
| B |
Width, inner ring |
66,675 mm |
| C |
Width, outer ring |
52,388 mm |
| T |
Width, total |
66,675 mm |
| Cr |
Basic dynamic load rating, radial |
1.090.000 N |
| C0r |
Basic static load rating, radial |
2.030.000 N |
| Cur |
Fatigue load limit, radial |
232.000 N |
| nG |
Limiting speed |
1.730 1/min |
| ≈m |
Weight |
26,9 kg |
| da max |
Maximum diameter of shaft shoulder |
360 mm |
| db min |
Minimum diameter of shaft shoulder |
373 mm |
| Da max |
Maximum diameter of housing shoulder |
434 mm |
| Ca min |
Minimum axial space |
7 mm |
| Cb min |
Minimum axial space |
14 mm |
| ra max |
Maximum fillet radius of shaft |
8,6 mm |
| r1, 2 min |
Minimum chamfer dimension of inner ring back face |
8,6 mm |
| r3, 4 min |
Minimum chamfer dimension of outer ring back face |
3,6 mm |
| a |
Distance between the apexes of the pressure cones |
77 mm |
| d1 |
Guidance rib diameter of inner ring |
390,5 mm |
| Tmin |
Operating temperature min. |
-30 °C |
| Tmax |
Operating temperature max. |
200 °C |
| e |
Limiting value of Fa/Fr for the applicability of diff. Values of factors X and Y |
0,35 |
| Y |
Dynamic axial load factor |
1,7 |
| Y0 |
Static axial load factor |
0,94 |
| Tolerance class |
Class 4 (ANSI/ABMA 19.2:2013), Tolerance of radial runout tKia, tKea and axial runout tSia reduced |
ABMA4XL |
| Heat treatment |
|
Standard |
| Cage |
Sheet steel cage, roller-guided |
Standard |
| Internal design |
|
Standard |
| Quality level |
X-life |
XL |
| Number of rows |
Single-row |
1 |
HU
EN
